Upwork Hourly Rate: What to Charge, What You Keep at Each Rate and Who Can Raise It Later
LunaGig team · · 16 min read

Your Upwork hourly rate is really three numbers: the rate on your profile, the rate you bid in each proposal, and the rate locked into each contract. A beginner profile typically shows $10 to $25 an hour, an intermediate one $25 to $60 and an expert one $60 to $120 or more, according to Upwork’s own hourly rate ranges.
You keep less than you quote, because the fee ranges from 0% to 15% per contract.
Every rate, fee and rule in this guide was checked against Upwork’s own help and resource pages on 15 November 2026. Each number links to its source or shows its math, and our editorial team updates this page when Upwork changes a rule.
Key takeaways
- You set three rates, not one. The profile rate is a public list price, the bid is your price for one job, and the contract rate is what you are paid.
- Price from your floor. Divide what you need each month by the hours you can really bill, then add the service fee on top.
- Lowering a rate is a one-way door. You can lower a contract rate at any time, but only the client can raise it again.
- Plan raises at the start. A scheduled rate increase can only be agreed when a new hourly contract begins.
- A rate only pays for billed hours. Time logged over the weekly limit is not invoiced, whatever your rate is.
What is an Upwork hourly rate?
An Upwork hourly rate is the price you charge a client for one hour of tracked work on an hourly contract. Most guides treat it as one number. On the platform it is three, and each one follows different rules.
| Rate | Where it shows | Who sets it | Can it change later? |
|---|---|---|---|
| Profile rate | On your public profile and in client searches | You | Yes, you can edit it at any time |
| Proposal bid | In each proposal you send | You, job by job | It can be higher or lower than your profile rate |
| Contract rate | In the contract, once the client hires you | You and the client agree it | You can lower it. Only the client can raise it |
Upwork describes the profile rate as the public hourly price a freelancer shows on a profile. It also says Upwork allows you to increase or decrease your hourly rate when submitting proposals. So the profile number is a starting point, not a promise.
The contract rate is the one that pays you, and it is the hardest to move. That is why this guide spends as much time on changing a rate as on setting one.
What is the average hourly rate on Upwork?
There is no single official average hourly rate on Upwork. Upwork publishes ranges by experience level and by skill, and says these work best as directional benchmarks, not hard rules.
| Experience level | Typical profile rate | What it usually looks like |
|---|---|---|
| Beginner | $10 to $25 an hour | New profile, first reviews, entry level work |
| Intermediate | $25 to $60 an hour | Proven results and steady demand |
| Advanced or expert | $60 to $120 or more an hour | Deep specialization in a hard to find skill |
The range depends heavily on your category. These examples come from the same Upwork list.
| Skill | Typical profile rate per hour |
|---|---|
| Virtual assistants | $10 to $20 |
| Data entry specialists | $10 to $20 |
| Web designers | $15 to $30 |
| Graphic designers | $15 to $35 |
| Video editors | $10 to $60 |
| Data analysts | $20 to $50 |
| Machine learning engineers | $50 to $200 |
| Data scientists | $35 to $250 |
Read these numbers with three cautions.
These are list prices. Upwork says the ranges reflect typical public hourly rates on freelancer profiles. A profile rate is what a freelancer asks, not what a client paid. Upwork’s help page on how to determine your rate tells you to check a freelancer’s work history too, because contract rates may differ.
They cover hourly work only. Fixed-price jobs have a total budget, not a rate, so they do not show up in these ranges.
One income figure is often misread as the average. Upwork cites research in which full-time skilled freelancers reported a median income of $85,000, which would be roughly $41 per hour if they worked 40 hours per week for 52 weeks. That is yearly income spread over a full-time year. It is not a median Upwork hourly rate.
Independent trackers also publish medians and rate distributions built from job postings. Those measure the budgets clients post, they are updated on their own schedules, and they move with the mix of jobs that week. Use them as market context, not as your price.
How do you set your hourly rate on Upwork?
To set your hourly rate on Upwork, start from your floor: the lowest rate that still pays your bills. The market range tells you what clients expect. Your floor tells you which jobs you cannot afford to take.
Methodology: the example below uses round numbers we chose for illustration. The share of billable time comes from Upwork, which says to plan around your available billable hours (typically 60% of total work time). Swap in your own numbers.
-
Add up what you need each month. Consider a freelancer who needs to keep $3,000 a month and spends $200 a month on software and other business costs. The target is $3,200.
-
Count the hours you can bill. A 40 hour week at 60% billable is 24 billable hours. Over a year that averages 104 billable hours a month.
-
Divide. $3,200 over 104 hours is $30.77 an hour. This is the take-home floor.
-
Add the service fee on top. If the contract fee is 10%, the rate to quote is $34.19 an hour.
-
Compare it with the market range. If your floor sits above the typical range for your skill, you need a narrower niche, not a lower price.
The billable share is the step people skip. If the same freelancer assumed all 40 hours were billable, the month would hold 173.33 hours and the floor would look like $18.46. That is $12.31 an hour too low, and the gap comes out of rent.
Upwork’s own rate guide makes the same point with a simpler example: you may work 40 hours a week but only bill clients for 30 of those hours. The rest goes to proposals, messages and admin. Taxes also come out of what you keep, and the rules differ by country, so ask a local adviser.
What do you keep at each Upwork hourly rate?
You keep your rate minus the Freelancer Service Fee shown on that contract. The Freelancer Service Fee is the percentage Upwork takes from each payment, and it is set per contract, so two jobs at the same rate can pay differently.
The table below shows the take-home pay per billed hour when the fee is 5%, 10% or 15%. Our guide to Upwork fees for freelancers covers the other costs, such as Connects and withdrawals.
| Rate you charge | You keep at a 5% fee | You keep at a 10% fee | You keep at a 15% fee |
|---|---|---|---|
| $15 | $14.25 | $13.50 | $12.75 |
| $25 | $23.75 | $22.50 | $21.25 |
| $40 | $38 | $36 | $34 |
| $60 | $57 | $54 | $51 |
| $100 | $95 | $90 | $85 |
A contract with a 0% fee pays the full rate. You do not have to guess which column applies. Upwork shows the fee percentage when a client sends you an offer or when you are submitting a proposal, and once a proposal, offer or contract is sent, the fee is locked in for that contract.
Working backwards from the pay you want
To take home a set amount, divide it by one minus the fee. Upwork’s help center gives two examples at a 10% fee. To take home $20 an hour you charge $22.22, and to take home $25 an hour you charge $27.78.
| Take-home pay you want | Charge at a 10% fee | Charge at a 15% fee |
|---|---|---|
| $20 an hour | $22.22 | $23.53 |
| $30 an hour | $33.33 | $35.29 |
| $50 an hour | $55.56 | $58.82 |
The client’s own marketplace fee is added on top of your rate on their side. It is not taken from your pay, so it does not belong in this math.
Should your proposal bid match your profile rate?
No. Your profile rate is a base, and each bid should fit the job in front of you. Clients must give a budget, and hourly job postings display a rate range, so you can see the client’s range before you bid.
| Situation | What to do with your bid | Why |
|---|---|---|
| Rush deadline or complex scope | Bid above your profile rate | The job costs you other work |
| Long-term client with steady hours | Consider a slightly lower bid | Less unpaid time spent finding new clients |
| Client range is below your floor | Skip the job | No bid inside that range pays your bills |
| Client range is above your profile rate | Bid inside their range | Your profile rate is not a ceiling |
Do not drop far below the market to win. Upwork warns that setting an advertised rate too low just to stay competitive might have a negative impact if clients perceive your work as low quality.
Two things help you bid well. Search for freelancers with your skill and read the rates in their work history. And if you pay for Freelancer Plus, Upwork says it allows you to see competitor bids on jobs you are interested in. Treat those bids as context, since you cannot see the quality behind them.
A strong proposal matters as much as the number. Our guide on writing Upwork proposals that get replies covers the words around the rate, and the Upwork profile examples show how to make a higher rate look justified.
The cheapest way to protect your rate is to stop bidding on jobs that cannot pay it. LunaGig watches new Upwork jobs, checks each client’s record against the brief you write, and alerts you to the matches worth a proposal. You review every draft and submit it on Upwork yourself. If that sounds useful, you can try LunaGig free.
Who can change the rate on a live hourly contract?
On a live contract you can only move your rate down. Upwork’s page on changing your contract’s hourly rate is blunt about it: as a freelancer, you can lower your hourly rate on an existing contract at any time, but only your client can increase the rate.
| Change | Who can make it | When it applies |
|---|---|---|
| Lower the contract rate | You, with no approval needed from the client | Right away, for hours you log from then on |
| Raise the contract rate | Only the client | Future hours only |
| Scheduled rate increase | You and the client agree it before the contract starts | Automatically, at the agreed interval |
| Add a scheduled increase to a running contract | Nobody. It needs a new contract | Not available |
This makes a discount a one-way door. For example, say you lower a $40 contract to $32 to help a client through a slow month. At 20 hours a week that is $8 an hour and $160 a week less. You cannot put the rate back yourself. Only the client can, and Upwork notes that your work history will update to show the new rate.
If a client asks for a short-term discount, consider keeping the rate and agreeing fewer hours. Your rate and your work history stay intact.
There are exceptions. Agency members cannot change the rate themselves, because the agency manager handles it. And if a scheduled rate increase is already set up, you cannot change the rate at all.
The test that raises your rate to cover the fee
Upwork is also running a test on a limited number of hourly contracts. In it, some clients may choose to adjust your hourly rate so you receive your full earnings even after the service fee. You do not need to accept anything, and the new rate applies only to future hours billed. Once it is on, lowering the rate on that contract is disabled.
How do you raise your rate without losing clients?
Raise your price where it is easiest first: with new clients. Then work back to the contracts you already have. There are four routes, and all of them stay inside Upwork’s rules.
-
Raise the profile rate and your next bids. New clients have no old price to compare with. Upwork suggests raising rates when you have more work than you can take on and are declining invites.
-
Ask a current client to raise the contract rate. Only they can do it, so you need a clear and friendly request. A template follows below.
-
Build the raise into the next contract. A scheduled rate increase is a raise that both sides agree at the start, and Upwork then applies it automatically. See the next section.
-
Start a new contract for new work. When the scope changes, a new contract at a new rate is cleaner than stretching the old one.
If invites and interviews dry up after a raise, Upwork says this may be a sign that your rate is too high. Good reviews and a healthy Job Success Score are what let a higher rate stick.
A message that asks for a raise
Hi [name], I have enjoyed working on [project] with you since [month]. From [date], my rate for this work will be [new rate] an hour. Only the client can raise the rate on an Upwork contract, so you would need to update it on your side. It applies only to hours logged after the change. Happy to talk it through if useful.
Give notice, name the date and keep it short. Our message to client samples include more templates for awkward moments like this one.
How scheduled rate increases work
Upwork’s help page on proposing a scheduled rate increase says you can include one in your proposal to a non-Enterprise client for an hourly contract. You pick how often the rate goes up and by how much. The amount is set as a percent of the rate in your proposal terms.
For example, a $30 rate with a 10% increase becomes $33. On a contract of 20 hours a week, that $3 is worth $60 more per week once the increase lands.
Three limits matter:
- The client can accept or decline your increase, or set a different amount or schedule in their offer.
- Once you both agree to the scheduled rate increase, it is permanent for the length of your contract. To negotiate new rates later, you start a new contract.
- It cannot be added to an existing contract, and it is not available for Enterprise contracts.
How do weekly limits and billing change what your rate pays?
Your rate is only half of your weekly pay. The other half is the weekly limit, the cap on hours that you and the client set on the contract.
Consider a $30 contract with a weekly limit of 20 hours. The most it can bill is $600 a week, and at a 10% fee you keep $540. If you log 23 hours, the extra 3 hours, worth $90, are not billed. Upwork’s page on how payments for hourly contracts work says time over the weekly limit won’t be invoiced, though you can ask the client about a bonus for it.
Pay also arrives later than many new freelancers expect. In most cases, you are paid for your time 10 days after the weekly billing period ends each Sunday.
Finally, a rate is only as safe as the hours behind it. To qualify for Hourly Payment Protection, you must log hours with the time tracker in the Upwork desktop app, add memos that describe the work and stay within the weekly limit. Time that is added manually does not qualify.
Payment safety starts before you bid, so check the client first. Our checklist for spotting bad Upwork clients before you spend Connects shows what to look for.
What is the Upwork minimum hourly rate?
The Upwork minimum hourly rate is $3.00 an hour. Upwork’s page on minimum hourly and fixed-price rates says it does not support contract rates under $3.00 USD per hour for hourly contracts.
For fixed-price contracts, the minimum pay for a project is $5.00. If a fixed-price job requires a set number of hours, the hourly minimum applies. In Upwork’s example, a job that asks for 10 hours of work must pay at least $30.00. A bonus cannot be offered in place of the minimum.
The minimum is a platform floor, not a price guide. Your own floor from the formula above is the number that matters.
When should you quote a fixed price instead?
Quote a fixed price when the deliverable is clear and you work faster than most. Hourly pay rewards time. Fixed-price pay rewards results, so a quick expert can earn more per hour than any hourly rate a client would accept.
Upwork’s advice is to estimate the hours required, multiply by your target hourly rate, then add room for revisions, communication time and project risk. With the $34.19 rate from the floor example, a job you estimate at 12 hours starts at $410.28 before that extra room.
Hourly contracts still suit open-ended work, where the client keeps adding tasks. If you are new, our guide to Upwork jobs for beginners explains how each contract type protects your pay.
Four rate mistakes that cost freelancers money
- Copying a platform average. An average covers every country, skill and experience level at once. Compare yourself with freelancers who sell the same service to the same kind of client.
- Forgetting unbilled time. A rate built on a full week of billable hours is too low from day one.
- Quoting your take-home number. The fee comes out of the rate you quote, so add it before you bid.
- Discounting a live contract. You can lower a rate in seconds and may never get it back.
Upwork hourly rate FAQ
What is a good Upwork hourly rate for a beginner?
Upwork’s ranges put beginners at $10 to $25 an hour, but a good rate is one above your own floor. If your floor is higher than the range for your skill, narrow your service until clients will pay more for it.
Is the median hourly rate on Upwork really around $25?
Upwork does not publish a platform-wide median. In its own ranges, $25 is where the beginner level ends and the intermediate level starts. Medians from other sites come from job postings, so they describe client budgets.
Why is the low end of Upwork hourly rates so low?
Upwork is a global market, so freelancers with very different living costs compete in the same searches, and the platform minimum is only $3.00 an hour. Many low-rate postings are also for simple, entry level tasks. You do not have to price against them.
What is a realistic ceiling for hourly rates?
In Upwork’s list, the top of the range reaches $200 an hour for machine learning engineers and $250 for data scientists. The highest rates go to rare skills, a strong track record and a narrow niche.
Why don’t higher-rate jobs fill my search results?
There are fewer of them, and they attract proposals fast. Filter your searches by budget and experience level, and reply early to the ones that fit.
Can I charge different clients different rates?
Yes. Every proposal and every contract has its own rate, so an old client can stay on an old rate while new clients pay your new one.
Can I raise my rate on an existing contract?
Not by yourself. Only the client can raise it, and the new rate applies to future hours. A scheduled rate increase has to be agreed when the contract starts.
How often should I raise my rate?
There is no fixed schedule. Raise it when your reviews, skills or demand have clearly improved, and when you are turning work away.
Spend your time on jobs that can pay your rate
A rate only works if you bid on jobs that can afford it. A short note about us: LunaGig is an independent, notify-only alert tool and is not affiliated with Upwork. It flags new jobs that match the brief you write, and you choose and send every proposal yourself. You can start with LunaGig, or contact our team through the site with any question.
Cover photo: Towfiqu barbhuiya on Pexels (free licence).


